Pallet Wrap Machine − model EXP-501
Power Pre-Stretch Type
Hot wire cutter & secure arm
Pneumatic clamp holds the film ready for the next pallet
Easy to load film carriage
A view of the stretch wrapper control panel showing that it:
- is simple to program
- can be rotated 180°
- located at the rear of the machine
View EXP-501 product information:
Pallet Wrap Machine Overview:
The Exp-501 is a traditional turntable type machine that has been designed to be as automatic as possible. Once the film has been loaded into the film jaw clamps there is no need to attach the film to the pallet in the normal way. At the end of the cycle the machine cuts the film with a hot wire, secures the tail end on to the pallet and then grips the film ready for the next load. It even comes with a remote control so if loaded by a lift truck the driver does not have to get out of his vehicle. This machine also comes complete with a heavy duty ramp.
Pallet Wrap Machine Standard Features:
- 1800mm turntable
- 2500mm wrapping height
- Up to 250% pre-stretch
- Cuts and grips film at the end of the wrap cycle
- Home position: the turntable always stops at the same position
- Choose between 0-9 wraps at the top and bottom of the pallet
- 3 Wrap options
- Turntable speed and carriage speed both adjustable
- Adjustable electronic tension control
- Pallet height photo sensor
- Soft start and stop
- Machine can be paused during cycle
- Reset button returns the carriage and turntable to the home position
- 180° Rotating Control Panel with touch screen control
- Trouble shooting shown on screen
- Remote control
- Supplied with heavy duty ramp
Pallet Wrap Machine Standard Options:
- Pit Frame
- 2000mm & 3000mm Wrapping Height (Special Order)
- Up to 300% pre-stretch
Pallet Wrap Machine Specifications:
| max. wrapping height: | 2500mm |
|---|---|
| max. turntable speed | 12rpm |
| max. loading weight | 2000kgs |
| turntable dia: | 1800mm as standard |
| film roll width: | 500mm |
| film roll outer dia: | 250mm |
| film roll inner dia: | 76mm |
| machine size: | 2550mm (L) x 1800mm (W) x 2850mm (H) |
| power supply: | single phase (supplied with a 13amp 3 pin plug) - requires connection to an air supply |
Pallet Wrap Machine Safety Features:
- conforms to current HSE legislations
- safety cut-out on film carriage and control panel
- height limitation sensors
Pallet Wrap Machine Warranty Information:
- FREE 1 year full parts & labour warranty (terms & conditions apply)
- Extend your warranty for up to 5 years for long term peace of mind
